GM Service Manual Online
For 1990-2009 cars only

    Caution: Refer to Fuel Rail Stop Bracket Installation Caution in the Preface section.


    Object Number: 1552482  Size: SH

    Important: DO NOT use the fuel injector O-ring seals again. Install NEW fuel injector O-ring seals during assembly.

  1. Lubricate the NEW fuel injector O-ring seals (532 and 534) with clean engine oil.
  2. Install the O-ring seals to the fuel injectors.
  3. Install the fuel injectors (533) and retainers (521).

  4. Object Number: 1408856  Size: SH
  5. Install the fuel rail assembly (510) to the manifold. Push firmly on both sides of the rail until all injectors have entered their bores.
  6. Apply a 5 mm (0.2 in) band of threadlock GM P/N 12345382 (Canadian P/N 10953489), or equivalent, to the threads of the fuel rail bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  7. Notice: Refer to Fastener Notice in the Preface section.

  8. Install the fuel rail bolts (511 and 512) and fuel rail ground strap (557).
  9. Tighten
    Tighten the fuel rail bolts to 10 N·m (89 lb in).


    Object Number: 1408855  Size: SH
  10. Inspect the fuel rail ground strap (557) for proper installation.