Table 1: | BCM Data |
Table 2: | RCDLR Data |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
Accy. Indicator Command | Data | On/Off | Off |
Accy. Relay Command | Data | On/Off | On |
Auxiliary Power | Data | On/Off | On |
Battery Voltage Signal | Data | Volts | 12.5 |
Brake Apply Sensor Reference Signal | Data | Volts | 5 |
Current Power Mode | Data | OFF/ACC/RUN/CRANK | RUN |
Idle Boost Level | Data | % | Varies |
Ignition Cycle Counter | Data | Counts | Varies |
Ignition Mode Switch | Data | Volts | 12.5 |
Ign. Mode Sw. Dimming Command | Data | On/Off | On |
Inadvertent Power Cmd. | Data | On/Off | Off |
Inadvertent Power Signal | Data | Active/Inactive | Active |
Key in Cylinder Switch | Data | Active/Inactive | Inactive |
Off Indicator Command | Data | On/Off | Off |
Run/Crank Relay Command | Data | On/Off | On |
Start Indicator Command | Data | On/Off | On |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
Battery Voltage Signal | Data | Volts | 12.5 |
Ignition Mode Switch | Data | Idle, ACC/OFF, Crank | Idle |
Run/Crank Relay Command | Data | On/Off | Off |