For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
- Drain the rear axle. Refer to Rear Axle Lubricant Replacement.
- Remove the rear mufflers.
- Remove the cooler inlet pipe. Refer to Differential Oil Pump Inlet Hose Replacement.
- Remove the cooler outlet pipe. Refer to Differential Oil Cooler Inlet Hose Replacement.
- Remove the mounting bolts (3) for the differential cooler pump (4).
- Remove the differential cooler pump (4).
- Remove the gasket (1).
| • | For the left rear muffler, refer to Exhaust Muffler Replacement - Left Side. |
| • | For the right rear muffler, refer to Exhaust Muffler Replacement - Right Side. |
Important: Note the location of the cover rear bolt/stud for assembly and the alignment of the outshaft of the differential and the input shaft for the pump.
Installation Procedure
- Install the gasket (1).
- Install the differential cooler pump (4).
- Install the retaining bolts.
- Install the cooler outlet pipe. Refer to Differential Oil Pump Inlet Hose Replacement.
- Install the cooler inlet pipe. Refer to Differential Oil Cooler Inlet Hose Replacement.
- Install the rear mufflers.
- Fill the differential assembly. Refer to Rear Axle Lubricant Replacement.
- Lower the vehicle.
Important: Note the alignment of the pinion shaft and input shaft of the pump. If the shafts do not line up, rotate the input shaft for the pump. If they are not aligned properly, the pump will not be seated correctly in the differential housing. Also, note the location of the bolt/stud for the proper installation.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the differential cooler mounting bolts (3) to 10 N·m (89 lb in).
| • | For the left rear muffler, refer to Exhaust Muffler Replacement - Left Side. |
| • | For the right rear muffler, refer to Exhaust Muffler Replacement - Right Side. |
