Tools Required
• | DT-47731 1/2 Inch Quick Connect
Release Tool |
Removal Procedure
- Install the J 41623-B
or the DT-47731
onto
the differential oil cooler (DOC) pipe.
- Slide the J 41623-B
or the DT-47731
toward
the DOC pipe fitting.
Important: Rotate the J 41623-B
or the DT-47731
to engage
the DOC pipe fitting's retainer slots.
The J 41623-B
or the DT-47731
should
be nearly flush with the fitting.
- Connect the J 41623-B
or
the DT-47731
onto the DOC pipe fitting.
- Rotate the J 41623-B
or the DT-47731
until
the retainer clip (1) rises above the fitting retainer seat.
- Pull back on the DOC pipe to disengage the
pipe from the DOC pipe fitting.
- Remove the J 41623-B
or
the DT-47731
from the DOC pipe.
Installation Procedure
Important: Inspect the DOC pipe fitting and retaining
clip for signs of wear or damage. Replace the components if necessary.
- Install the DOC pipe into the DOC pipe fitting.
A distinct snap
should be heard or felt when assembling the DOC pipe to the fitting.
- To ensure the cooler line is properly installed, give the cooler pipe
a gentle pull.