Preliminary Procedure

1. Remove both inner tail lamps. Refer to Tail Lamp Replacement.
2. Reach inside the tail lamp holes and remove the four nuts securing the rear spoiler to the rear bumper fascia.
3. Disconnect the electrical connector.

1

Rear Spoiler Stud (Qty: 4)

Tip
Remove the center two studs in order to separate the CHMSL from the rear spoiler.

2

Center High Mounted Stop Lamp (CHMSL)

Tip
Remove the two inner studs from the rear spoiler in order to separate the CHMSL from the rear spoiler.

3

Rear Spoiler

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)