Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Cap, Wiper Arm (Qty: 2)

2

Nut, Wiper Arm (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Wiper Arm, Wiper Arm Assembly

Important: Use the J 39637 Wiper Arm Puller to remove the wiper arm from the wiper arm drive spindle.

4

Seal, Hood

5

Screw, Air Inlet Grille Panel (Qty: 2)

Tighten
3 N·m (27 lb in)

6

Panel Assembly, Air Inlet Grille Panel