1

Rear Quarter Panel Nameplate

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Tip

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new GM nameplate.
3. Press the nameplate firmly to the rear lower quarter panel to ensure full adhesion to that panel.