1

Front Fender Emblem (Z06)

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Tip

1. Use J 25070 or equivalent to remove old fender emblem. Clean all adhesive from the fender, wipe surface dry with a clean lint-free towel prior to installing new emblem.
2. When removing the protective backing from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Align the tab on the backside of the emblem to the small notch located in the fender prior to adhesion.
4. Ensure full adhesion of the emblem is made to the front fender.