Clutch Pedal Position Switch Replacement. Chevrolet Corvette 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Corvette 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Clutch Pedal Position Switch Replacement

Caution: Refer to Battery Disconnect Caution in the Preface section.

Disconnect the negative battery cable.
Remove the clutch pedal position switch (clutch start switch) electrical connector.

Insert a feeler gage between the switch and the clutch pedal bracket to release the switch tab.
Remove the switch.

Lift the switch slightly then pull to remove.

Install the clutch pedal position switch (clutch start switch) to the clutch pedal bracket.

Insert the switch locators into the top of the slots, then slide down to lock.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
Tighten the negative battery cable bolt to 15 N·m (11 lb ft).