Notice: Prying against the folding top rails could result in damage to parts.

Preliminary Procedures

1. Remove the right side rear compartment trim panel. Refer to Rear Compartment Side Trim Panel Replacement .
2. Position the folding top with the number# 1 bow and the number# 5 bow up, to access fasteners and minimize tension on pins and linkage.

1

Folding Top Number# 5 Bow Position Switch Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
8 N·m (70 lb in)

2

Folding Top Number# 5 Bow Position Switch Pivot

3

Folding Top Number# 5 Bow Position Switch

Tip

1. Disconnect the electrical connectors.
2. Install the new switch to the pivot arm.
3. Ensure that the switch slides on the pivot arm when closing the folding top.