1

Front Side Door Sill Trim Plate Decal

Tip

1. Use a plastic flat-bladed tool to remove the sill plate decal.
2. Remove the old adhesive from the door sill mounting area with alcohol prior to installing the new sill plate.
3. Replacement decal has a protective backing on front and underside face of part, backing paper has notches and marked on locator to aid in installation.
4. Slide decal against step in mounting area and align 3 notches in upper backing paper of decal with the 3 notches in the inboard edge of side door finish panel.
5. Ensure that the mark in the upper backing paper of decal indicating the position of the drain hole in the side door finish panel is over drain hole.
6. Wet out the entire area of the upper backing paper of decal to secure to side door finish panel.
7. Remove upper backing paper from decal and inspect sill plate for air pockets.