GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Corvette 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Inflatable Restraint Side Impact Module Wiring Harness Replacement

Removal Procedure

    Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the side impact inflator module from the seat. Refer to Driver and Passenger Seat Side Inflatable Restraint Module Replacement .

    3. Object Number: 1276234 Size: SH
  3. With the seat back cover in the open position the wiring harness on the side impact inflator module will be exposed.

    4. Remove the retaining clips that secure the inflator module wiring harness to the seat.

  4. Remove the wiring harness.

Installation Procedure

    Object Number: 1276234 Size: SH
  1. Install the new inflator module wiring harness to the seat. Install the retaining clips that secure the wiring harness to the seat.
  2. Install the side impact inflator module to the seat. Refer to Driver and Passenger Seat Side Inflatable Restraint Module Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .