Steering Wheel Replacement. Chevrolet Corvette 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Corvette 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Steering Wheel Replacement

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
1	Steering Wheel Nut Tighten 37 N·m (27 lb ft)
2	Steering Wheel Assembly Tip Disconnect the electrical connector. Remove the steering wheel using J 1859-A Steering Wheel Puller with J 36541-A Steering Wheel Puller Legs. Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the wheel during installation.

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .

Steering Wheel Nut

Tighten
37 N·m (27 lb ft)

Steering Wheel Assembly

Tip

Disconnect the electrical connector.
Remove the steering wheel using J 1859-A Steering Wheel Puller with J 36541-A Steering Wheel Puller Legs.
Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the wheel during installation.