On vehicles with the memory package, the controls are located on the driver's door.
1: Saves the seating position for driver 1.2: Saves the seating position for driver 2.
: Recalls the easy exit position.
The numbers on the back of the keyless access transmitters correspond to the numbers on the memory buttons.
To save seating positions in the memory:
- Adjust the driver's seat, both outside mirrors, and the telescopic steering column to a comfortable driving position.
- Press and hold button 1 until two beeps let you know that the position has been stored in the memory.
A second seating, mirror, and telescopic steering column position can be set by repeating the above steps and pressing button 2.
To recall a memory position:
| • | On vehicles with an automatic transmission, press and release the desired button. |
| If the vehicle is in (P) Park, a single beep sounds and the memory position is recalled after a brief delay. |
| If the vehicle is not in (P) Park, three beeps sound and the memory position is not recalled. |
| • | On vehicles with a manual transmission, when the vehicle is on, the parking brake needs to be set to recall the memory position. Press and release the desired button. |
| A single beep sounds and the memory position is recalled after a brief delay. |
| If the vehicle is on and the parking brake is not set, three beeps sound and the memory position is not recalled. |
For vehicles with the Auto Memory Recall, see "Auto Memory Recall" under DIC Vehicle Personalization for more information.
To stop recall movement of the memory feature, press one of the power seat controls, power mirror or memory buttons, or the telescopic steering column switch.
Easy Exit Seat
(Easy Exit Seat): This button is used to program and recall the desired driver's seat exit position.To program an exit position:
- Recall the desired driving position by pressing button 1.
- Adjust the seat and the telescopic steering column position to a comfortable exit position.
- Press and hold the exit button until two beeps sound to let you know that the exit position is now programmed.
A second exit position can be programmed by repeating the above steps and pressing button 2.
To recall an exit position:
| • | On vehicles with an automatic transmission, the vehicle needs to be in (P) Park. |
| • | On vehicles with a manual transmission, the parking brake must be set. |
One beep will sound and the exit position for the currently identified driver will be recalled.
For vehicles with the Auto Exit Recall, see "Auto Exit Recall" under DIC Vehicle Personalization for more information.
