Tools Required

1. Install the J 41623-B , or the DT-47731 or the DT-47624 onto the transmission oil cooler (TOC) pipe.



2. Slide the J 41623-B , or the DT-47731 or the DT-47624 toward the TOC pipe fitting.




Important: Rotate the J 41623-B , or the DT-47731 or the DT-47624 to engage the TOC pipe fitting's retainer slots.

The J 41623-B , or the DT-47731 or the DT-47624 should be nearly flush with the fitting.
3. Connect the J 41623-B , or the DT-47731 or the DT-47624 onto the TOC pipe fitting.



4. Rotate the J 41623-B , or the DT-47731 or the DT-47624 until the retainer clip (1) rises above the fitting retainer seat.



5. Pull back on the TOC pipe to disengage the pipe from the TOC pipe fitting.
6. Remove the J 41623-B , or the DT-47731 or the DT-47624 from the TOC pipe.

Important: Inspect the TOC pipe fitting and retaining clip for signs of wear or damage. Replace the components if necessary.

1. Install the TOC pipe into the TOC pipe fitting.

A distinct snap should be heard or felt when assembling the TOC pipe to the fitting.

2. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.