GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Engine 🢒 Engine Cooling 🢒 Radiator Air Baffle Assemblies and Deflectors

Radiator Air Baffle Assemblies and Deflectors W/O Auxiliary Oil Cooler

Removal Procedure
  1. Disconnect the ambient air temperature sensor electrical connector.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    3. Object Number: 1306029 Size: SH
  3. Remove the outer front fascia mounting screws.
  4. Remove the air baffle mounting screws.

    5. Object Number: 929130 Size: SH
  5. Remove the RH radiator air baffle lower screw.

    6. Object Number: 929141 Size: SH
  6. Remove the LH side air deflector retainer pins.

    7. Object Number: 929147 Size: SH
  7. Remove the RH side air deflector retainer pins.
  8. Lower the vehicle.

    9. Object Number: 929132 Size: SH
  9. Remove the LH radiator air baffle upper retainer pin (1).

    10. Object Number: 929137 Size: SH
  10. Remove the RH radiator air baffle upper retainer pin (1).

    11. Object Number: 929152 Size: SH
  11. Remove the radiator air baffle.

Installation Procedure

    Object Number: 929152 Size: SH
  1. Install the radiator air baffle.

    2. Object Number: 929137 Size: SH
  2. Install the RH radiator air baffle upper retainer pin (1).

    3. Object Number: 929132 Size: SH
  3. Install the LH radiator air baffle upper retainer pin (1).
  4. Raise and support the vehicle.

    5. Object Number: 929147 Size: SH
  5. Install the RH side air deflector retainer pins.

    6. Object Number: 929141 Size: SH
  6. Install the LH side air deflector retainer pins.

    7. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 929130 Size: SH
  7. Install the RH radiator air baffle lower screw.

    8. Tighten
    Tighten the bolt to 2.5 N·m (22 lb in).


    Object Number: 1306029 Size: SH
  8. Install the air baffle mounting screws.

    9. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  9. Install the outer front fascia mounting screws.

    10. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  10. Lower the vehicle.
  11. Connect the ambient air temperature sensor electrical connector.

Radiator Air Baffle Assemblies and Deflectors With Auxiliary Oil Cooler

Removal Procedure
  1. Disconnect the ambient air temperature sensor electrical connector.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Remove the auxiliary engine oil cooler. Refer to Auxiliary Engine Oil Cooler Replacement.

    4. Object Number: 1306029 Size: SH
  4. Remove the outer front fascia mounting screws.
  5. Remove the air baffle mounting screws.

    6. Object Number: 929130 Size: SH
  6. Remove the RH radiator air baffle lower screw.

    7. Object Number: 929141 Size: SH
  7. Remove the LH side air deflector retainer pins.

    8. Object Number: 929147 Size: SH
  8. Remove the RH side air deflector retainer pins.
  9. Lower the vehicle.

    10. Object Number: 929132 Size: SH
  10. Remove the LH radiator air baffle upper retainer pin (1).

    11. Object Number: 929137 Size: SH
  11. Remove the RH radiator air baffle upper retainer pin (1).

    12. Object Number: 929152 Size: SH
  12. Remove the radiator air baffle.

Installation Procedure

    Object Number: 929152 Size: SH
  1. Install the radiator air baffle.

    2. Object Number: 929137 Size: SH
  2. Install the RH radiator air baffle upper retainer pin (1).

    3. Object Number: 929132 Size: SH
  3. Install the LH radiator air baffle upper retainer pin (1).
  4. Raise and support the vehicle.

    5. Object Number: 929147 Size: SH
  5. Install the RH side air deflector retainer pins.

    6. Object Number: 929141 Size: SH
  6. Install the LH side air deflector retainer pins.

    7. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 929130 Size: SH
  7. Install the RH radiator air baffle lower screw.

    8. Tighten
    Tighten the bolt to 2.5 N·m (22 lb in).


    Object Number: 1306029 Size: SH
  8. Install the air baffle mounting screws.

    9. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  9. Install the auxiliary engine oil cooler. Refer to Auxiliary Engine Oil Cooler Replacement.
  10. Install the outer front fascia mounting screws.

    11. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  11. Lower the vehicle.
  12. Connect the ambient air temperature sensor electrical connector.