GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Engine 🢒 Engine Cooling 🢒 Radiator Support Replacement

Removal Procedure
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .

    2. Object Number: 1481369 Size: SH
  2. Disconnect the surge tank inlet hose assembly from the radiator support tabs.

    3. Object Number: 1481364 Size: SH
  3. Remove the radiator support bolts.

    4. Important: Note the position of the radiator support in relationship to the fan shroud. This must be reassembled correctly in order to retain the fan shroud.


    Object Number: 1481368 Size: SH
  4. Remove the radiator support.

Installation Procedure

    Object Number: 1481368 Size: SH

    Important: Position the radiator support in the correct relationship to the fan shroud.

  1. Install the radiator support.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1481364 Size: SH
  2. Install the radiator support bolts.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 1481369 Size: SH
  3. Connect the surge tank inlet hose assembly to the radiator support tabs.
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .