GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust Tail Pipe Flow Valve Vacuum Pipe Reservoir Tank Replacement

Removal Procedure

    Object Number: 1704526 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the vacuum line (2) from the vacuum tank located behind the right rear quarter panel.
  3. Remove the nuts (1) securing the vacuum tank to the rear tub.
  4. Remove the vacuum tank from the vehicle.

Installation Procedure

    Object Number: 1704526 Size: SH
  1. Install the vacuum tank to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the nuts (1).

    3. Tighten
    Tighten the vacuum tank mounting nuts to 10 N·m (89 lb in).

  3. Connect the vacuum line (2) to the vacuum tank.
  4. Lower the vehicle.