• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The instrument panel cluster (IPC) illuminates the antilock brake system (ABS) indicator by supplying ground to the lamp. The electronic brake control module (EBCM) sends a high speed GMLAN serial data message to the body control module (BCM), to request the indicator to turn ON or OFF. The BCM sends the request to the IPC on the class 2 serial data bus.
Control Module References for Scan Tool Information
Ignition ON. Observe the ABS indicator turn ON then OFF during the IPC bulb test.
⇒ | If the ABS indicator does not turn ON and OFF when commanded, replace the IPC. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for EBCM or IPC replacement, setup, and programming