Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the RF tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove the RH front wheelhouse rear liner. Refer to Front Wheelhouse Liner Replacement .

1

Oil Temperature Sensor Electrical Connector

2

Oil Temperature Sensor

Tighten
20 N·m (15 lb ft)