Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
3. Disconnect the front fog lamp bulb socket electrical connectors.

1

Front Fog Lamp Mounting Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Front Fog Lamp

Tip
Lower the fog lamp in order to release the upper alignment pins from the tabs on the front fascia.