GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Backup Lamp Switch Replacement

Removal Procedure

    Object Number: 180651 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the catalytic converters. Refer to Catalytic Converter Replacement - Left Side and Catalytic Converter Replacement - Right Side.
  3. Disconnect the backup lamp switch electrical connector.

    4. Object Number: 71528 Size: SH
  4. Remove the backup lamp switch.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 71528 Size: SH
  1. Install the backup lamp switch.

    2. Tighten
    Tighten the backup lamp switch to 20 N·m (15 lb ft).


    Object Number: 180651 Size: SH
  2. Connect the backup lamp switch electrical connector.
  3. Install the catalytic converters. Refer to Catalytic Converter Replacement - Left Side and Catalytic Converter Replacement - Right Side.
  4. Lower the vehicle.