Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement
.
- Disconnect the lower LH diagnostic test mode (DTM) sensor electrical connector.
Important: Rotate the DTM sensor counterclockwise to disengage the sensor from the lower duct.
- Remove the lower LH DTM sensor from the HVAC module.
Installation Procedure
Important: Rotate the DTM sensor clockwise to engage the sensor to the lower duct.
- Install the lower LH DTM sensor to the HVAC module.
- Connect the lower LH DTM sensor electrical connector.
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement
.