Removal Procedure
- Fold the passenger side carpet back exposing the electrical center.
- Remove the 4 amplifier retaining screws from the electrical multi-use bracket.
- Remove the amplifier from the bracket.
- Disconnect the electrical leads to the amplifier.
Installation Procedure
- Position the amplifier to the electrical multi-use bracket and connect the electrical leads to the amplifier.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 4 amplifier retaining screws to the bracket.
Tighten
Tighten the screws to 2.5 N·m (22 lb in).
- Install the carpet to cover the instrument panel (I/P) electrical center.