Backup Lamp Switch with Transmission Position Sensor Replacement. Chevrolet Corvette 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Transmission/Transaxle 🢒 Manual Transmission - Tremec 6-Speed 🢒 Backup Lamp Switch with Transmission Position Sensor Replacement

Callout	Component Name
Preliminary Procedures Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the intermediate pipe. Refer to Intermediate Pipe Replacement.
1	Backup Lamp Switch and Transmission Position Sensor Notice: Refer to Component Fastener Tightening Notice in the Preface section. Procedure Disconnect the electrical connector. Tighten 20 N·m (15 lb ft)

Callout

Component Name

Preliminary Procedures

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the intermediate pipe. Refer to Intermediate Pipe Replacement.

Backup Lamp Switch and Transmission Position Sensor

Notice: Refer to Component Fastener Tightening Notice in the Preface section.

Procedure

Disconnect the electrical connector.

Tighten
20 N·m (15 lb ft)