Removal Procedure
- Starting at the lock pillar
lift the sill plate unsnapping the clips from the door opening finish trim
panel.
- Unsnap the sill plate from the hinge pillar.
- Slide the sill plate out from under the hinge pillar upper trim,
and on the drivers side out from around the hood release handle and the foot
rest.
Installation Procedure
- Position the front of
the sill plate under the hinge pillar upper trim with the rear of the sill
plate tilted up.
- Lower the rear of the sill plate inserting the front of the sill
plate behind the hood release handle and the foot rest (drivers side).
- Push forward on the sill plate aligning the sill plate retainers
with the slots in the door opening finish trim panel.
- Snap the sill trim plate into the hinge pillar first and then
into the door opening finish trim panel.