Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Instrument Panel Compartment Assembly

1

Compartment Assembly - Instrument Panel

Tip

1. Open the instrument panel compartment.
2. Squeeze the sides of the compartment drawer and pull the compartment open past the stops.
3. Disconnect the electrical connections to the compartment.
4. Lift the compartment assembly from the compartment hinge.

Instrument Panel Compartment Trim Plate

1

Compartment Assembly - Instrument Panel

2

Screw, Instrument Panel Compartment Trim Plate Assembly (Qty: 3)

Tighten
2 N·m (18 lb in)

3

Plate Assembly - Instrument Panel Compartment Trim

4

Clip, Instrument Panel Compartment Trim Plate (Qty: 2)

Instrument Panel Compartment Striker

5

Screws, Instrument Panel Compartment Striker (Qty: 4)

6

Striker, Instrument Panel Compartment

Instrument Panel Compartment Bumper

7

Bumper, Instrument Panel Compartment

Instrument Panel Compartment Handle Assembly

8

Bolt, Instrument Panel Compartment Handle Assembly (Qty: 2)

9

Handle Assembly - Instrument Panel Compartment

Instrument Panel Compartment Handle Lock Assembly

10

Lock Assembly - Instrument Panel Compartment Handle

Tip

1. Insert a small pointed tool into the lock release hole.
2. Pull the lock assembly from the instrument panel compartment handle.

Instrument Panel Compartment Stop Bumpers

11

Stop Bumper, Instrument Panel Compartment

Instrument Panel Compartment Lamp Assembly

12

Lamp Assembly, Instrument Panel Compartment

Tip

1. Open the instrument panel compartment.
2. Use a flat-bladed tool in order to release the lamp assembly from the instrument panel compartment trim plate.
3. Disconnect the electrical connection.