1
| Front Side Door Sill Trim Plate Decal
Tip
- Use a plastic flat-bladed tool to remove the sill plate decal.
- Remove the old adhesive from the door sill mounting area with alcohol prior to installing the new sill plate.
- Replacement decal has a protective backing on front and underside face of part, backing paper has notches and marked on locator to aid in installation.
- Slide decal against step in mounting area and align 3 notches in upper backing paper of decal with the 3 notches in the inboard edge of side door finish panel.
- Ensure that the mark in the upper backing paper of decal indicating the position of the drain hole in the side door finish panel is over drain hole.
- Wet out the entire area of the upper backing paper of decal to secure to side door finish panel.
- Remove upper backing paper from decal and inspect sill plate for air pockets.
|