Callout
| Component Name
|
Preliminary Procedures
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
- Remove the right catalytic converter. Refer to
Catalytic Converter Replacement - Right Side
|
1
| Nut
Notice: Refer to Fastener Notice in the Preface section.
Tighten 8 N·m (71 lb in) |
2
| Bolt (Qty: 2)
Tighten 50 N·m (37 lb ft) |
3
| Starter
Procedure
• | Disconnect the S terminal harness connector from the starter. |
| Note: Orient the B+ terminal Harness anti rotation tab to the starter orientation slot.
|
• | Remove the B+ terminal harness from the starter. |
|