Inflatable Restraint Front End Sensor Replacement for Chevrolet Corvette 2008

1. Disable the SIR system. Refer to SIR Disabling and Enabling .



2. Remove the retaining bolts from the inflatable restraint front end sensor.
3. Remove the sensor from the vehicle.

1. Install the sensor from the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the retaining bolts to the inflatable restraint front end sensor.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

3. Enable the SIR system. Refer to SIR Disabling and Enabling .