Removal Procedure
- Remove the instrument panel (I/P) assembly. Refer to
Instrument Panel Assembly Replacement .
- Remove the bolts and screws retaining the air distribution duct to the
underside of the I/P assembly.
- Remove the air distribution duct.
- Remove the discharge temperature management (DTM) sensors from the air
distribution duct.
Installation Procedure
- Install the DTM sensors to the air distribution duct.
- Install the air distribution duct into position on
the I/P assembly.
- Install the retaining bolts and screws to the underside of the I/P assembly.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Install the I/P assembly. Refer to
Instrument Panel Assembly Replacement .