Exhaust System Insulator, Hanger, Bracket Replacement for Chevrolet Corvette 2009

Exhaust System Insulator, Hanger, Bracket Replacement Exhaust Muffler

1. Remove the muffler. Refer to Exhaust Muffler Replacement - Left Side or Exhaust Muffler Replacement - Right Side.
2. Remove the muffler hanger nuts and hanger.
3. Remove the push-on retainer, if necessary.
4. Remove the hanger reinforcement, if necessary.

1. Install the hanger reinforcement, if necessary.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the push-on retainer, if necessary.
3. Install the muffler hanger and nuts.

Tighten
Tighten the muffler hanger nuts to 16 N·m (12 lb ft).

4. Install the muffler. Refer to Exhaust Muffler Replacement - Left Side or Exhaust Muffler Replacement - Right Side.

Exhaust System Insulator, Hanger, Bracket Replacement Exhaust Pipe Rear

1. Remove the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement.
2. Remove the floor panel tunnel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement.
3. Remove the upper exhaust pipe hanger bolts.
4. Remove the exhaust pipe hanger.

1. Install the exhaust pipe hanger.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the upper exhaust pipe hanger bolts.

Tighten
Tighten the exhaust pipe hanger bolts to 50 N·m (37 lb ft).

3. Install the floor panel tunnel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement.
4. Install the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement.