GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Drive Belt Idler Pulley Replacement

Drive Belt Idler Pulley Replacement LS9


Object Number: 2110911 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory.

1

Drive Belt Idler Pulley Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Drive Belt Idler Pulley

Procedure

Transfer components as necessary.

Drive Belt Idler Pulley Replacement w/o LS9

Removal Procedure

    Object Number: 651862 Size: SH
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory.
  2. Loosen the drive belt idler pulley mounting bolt.
  3. Remove the drive belt idler pulley.

Installation Procedure

    Object Number: 651862 Size: SH
  1. Position the drive belt idler pulley on generator mounting bracket.
  2. Hand tighten the drive belt idler pulley mounting bolt.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the drive belt idler pulley bolt.

    4. Tighten
    Tighten the drive belt idler pulley bolt to 50 N·m (37 lb ft).

  4. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory.