Barometric Pressure Sensor Replacement. Chevrolet Corvette 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Barometric Pressure Sensor Replacement

Callout	Component Name
Preliminary Procedure Remove the upper intake cover. Refer to Upper Intake Manifold Sight Shield Replacement.
1	MAP Sensor Bolt Caution: Refer to Fastener Caution in the Preface section. Tighten 10 N·m (89 lb in)
2	MAP Sensor Tip Always install the NEW O-ring provided with the map sensor. Procedure Disconnect the MAP sensor harness connector.

Callout

Component Name

MAP Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

MAP Sensor

Tip
Always install the NEW O-ring provided with the map sensor.

Disconnect the MAP sensor harness connector.