GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Mode Valve Actuator Replacement

Removal Procedure

    Object Number: 1224369 Size: SH
  1. Remove the SIR bracket. Refer to Instrument Panel Inflatable Restraint Module Bracket Replacement.
  2. Disconnect the mode actuator electrical connector.
  3. Remove the mode actuator mounting screws.
  4. Remove the mode actuator.

Installation Procedure

    Object Number: 1224369 Size: SH
  1. Install the mode actuator.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the mode actuator mounting screws.

    3. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  3. Connect the mode actuator electrical connector.
  4. Install the SIR bracket. Refer to Instrument Panel Inflatable Restraint Module Bracket Replacement.
  5. Recalibrate the actuators. Refer to Actuator Recalibration.