Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
3. Disconnect the front fog lamp bulb socket electrical connectors.

1

Front Fog Lamp Mounting Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Front Fog Lamp

Tip
Lower the fog lamp in order to release the upper alignment pins from the tabs on the front fascia.