Inside Rearview Mirror Replacement DD8

1. Remove the electrical connector (1) from the back of the inside rearview mirror.




Caution: Do NOT pull rearward on the rearview mirror while installing or removing the mirror. Damage to the support or to the windshield may occur.

2. Rotate the mirror COUNTERCLOCKWISE until an audible click is heard.
3. Remove the inside rearview mirror.

1. Install the electrical connector (1) to the back of the inside rearview mirror.



2. Center the bottom of the inside rearview mirror on the support.

Caution: Do NOT pull rearward on the rearview mirror while installing or removing the mirror. Damage to the support or to the windshield may occur.

3. Rotate the mirror COUNTERCLOCKWISE until an audible click is heard. An audible click is heard when the inside rearview mirror is fully seated.

Inside Rearview Mirror Replacement Except DD8

1. Disconnect the inside rearview mirror electrical connector.
2. Loosen the mirror mount tension screw.
3. Slide the mirror up off the mirror bracket.

1. Slide the rearview mirror down onto the bracket.

Caution: Refer to Fastener Caution in the Preface section.

2. Connect the electrical connector.
3. Tighten the mirror tension screw.

Tighten
Tighten the rearview mirror mount tension screw to 1.5 N·m (13 lb in).