GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Inflatable Restraint Front End Sensor Replacement

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling.

    2. Object Number: 1226200 Size: SH
  2. Remove the retaining bolts from the inflatable restraint front end sensor.
  3. Remove the sensor from the vehicle.

Installation Procedure

    Object Number: 1226200 Size: SH
  1. Install the sensor from the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the retaining bolts to the inflatable restraint front end sensor.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling.