GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Transmission 🢒 Clutch 🢒 Engine Mount Replacement - Left Side

Removal Procedure

    Object Number: 651864 Size: SH
  1. Remove the front suspension crossmember. Refer to Front Suspension Crossmember Replacement.
  2. Remove the engine mount-to-engine mount bracket nut.
  3. Remove the engine mount.
  4. Remove the engine mount heat shield from the engine mount, if necessary.

Installation Procedure

    Object Number: 651864 Size: SH
  1. Install the engine mount heat shield to the engine mount, if necessary.
  2. Install the engine mount.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the engine mount-to-engine mount bracket nut.
    4. • Except LS9/ZR1, tighten the nut to 65 N·m (48 lb ft).
    • For LS9/ZR1, tighten the nut to 100 N·m (74 lb ft).
  4. Install the front suspension crossmember. Refer to Front Suspension Crossmember Replacement.