For 1990-2009 cars only
Removal Procedure
- Remove the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement.
- Use a small drift or punch to remove the roll-pin retaining the hydraulic hose to the actuator cylinder.
- Remove the hydraulic hose from the actuator cylinder.
- Drain off the excess fluid from the actuator cylinder into a container.
Installation Procedure
- Install the new clutch actuator cylinder hose to the clutch actuator cylinder.
- Install the actuator cylinder hose roll-pin retainer using a small drift or punch.
- Rotate the actuator cylinder hose to ensure freedom of movement.
- Install the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement.
Check the new O-ring seal for proper placement on the actuator cylinder hose.
