Preliminary Procedure

1. Enable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the driver seat adjuster finish cover. Refer to Driver Seat Adjuster Finish Cover Replacement.
3. Remove the seat belt retaining nut and the seat belt from the anchor stud. Refer to Seat Belt Retractor Replacement - Left Front.

1

Driver and Passenger Seat (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Driver and Passenger Seat Nut

Tighten
50 N·m (37 lb ft)

3

Driver and Passenger Seat

Procedure

1. Disconnect any electrical connectors.
2. Transfer components as necessary.