1

Hood Open Assist Rod (Qty: 2)

Warning:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Caution: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Procedure

Use a small flat-bladed tool to release the metal clips at the ends of the assist rod, then pull away from the stud.

2

Hood Hinge Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
24 N·m (18 lb ft)

3

Hood