1

Front Bumper Valance Panel Fastener (Qty: 4)

Warning: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

Caution: Refer to Fastener Caution in the Preface section.

Procedure

New fascia only, drill four 5 mm holes through the fascia skin only (U-nuts are right behind fascia skin on reinforcement) using the valence panel as a template, at location one.

Tighten
0.5 N·m (4 lb in)

2

Front Bumper Valance Panel Fastener (Qty: 9)

Tighten
0.5 N·m (4 lb in)

3

Front Bumper Valance Panel

1

Front Bumper Valance Panel Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

2

Front Bumper Valance Panel Plastic Retainer (Qty: 1)

3

Front Bumper Valance Panel

1

Front Bumper Valance Panel Bolts (Qty: 11)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Front Bumper Valance Panel