Preliminary Procedure

Remove the front wheelhouse (front liner) liner. Refer to Front Wheelhouse Liner Replacement.

1

Front Fascia Extension Plastic Retainers (Qty: 4)

Tip
Release only the four retainers holding the front fascia extension to the radiator baffle. The fascia extension will come off with the fascia.

2

Front Fascia Lower Screws (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Front Fascia Lower Nuts (Qty: 2)

Tighten
5.5 N·m (49 lb in)

4

Front Fascia To Fender Nuts (Qty: 4)

Tighten
5 N·m (44 lb in)

5

Front Fascia Upper Retaining Clips (Qty: 4)

Tip
Use a small nylon wedge tool to release the anti-rotation retainer on the outboard end of the fender/fascia joint and pull upwards and out to release it from the fender.

6

Front Fascia Upper Screws (Qty: 4)

Tighten
2 N·m (18 lb in)

7

Front Fascia