Steering Wheel Inflatable Restraint Module Replacement. Chevrolet Corvette 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Wheel Inflatable Restraint Module Replacement

Callout	Component Name
Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section. Warning: Refer to SIR Warning in the Preface section. Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling. On the sides of the steering wheel are 2 circular openings, place the wheel so that one opening is on top. Using a blunt-ended tool, push the spring fastener inward through the access hole. Repeat the step for the other opening.
1	Steering Wheel Inflatable Restraint Module Tip Release the connector position assurance (CPA) retainer. Disconnect the electrical connectors. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.

Callout

Component Name

Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section.

Warning: Refer to SIR Warning in the Preface section.

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
On the sides of the steering wheel are 2 circular openings, place the wheel so that one opening is on top.
Using a blunt-ended tool, push the spring fastener inward through the access hole. Repeat the step for the other opening.

Steering Wheel Inflatable Restraint Module

Tip

Release the connector position assurance (CPA) retainer.
Disconnect the electrical connectors.
Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.