GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Cooling Fan Control Module Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1500599 Size: SH
  2. Disconnect the cooling fan control module electrical connector.

    3. Object Number: 1500602 Size: SH
  3. Remove the cooling fan control module retaining bolt.
  4. Remove the cooling fan control module from the vehicle.

Installation Procedure

    Object Number: 1500602 Size: SH
  1. Install the cooling fan control module to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the cooling fan control module retaining bolt and tighten to 6 N·m (53 lb in).

    3. Object Number: 1500599 Size: SH
  3. Connect the cooling fan control module electrical connector.
  4. Lower the vehicle.
  5. Refer to Control Module References for programming and setup information.