Door Lock Control Module Scan Tool Information Driver Door Switch
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays volts. This is the voltage input supplied to the driver door switch. |
Door Lock Switch | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door lock switch. |
Driver LF Window Switch | -- | Idle | The scan tool displays Idle, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
Driver RF Window Switch | -- | Idle | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right front window switch. |
Mirror Direction Switch | -- | Idle | The scan tool displays Idle, Right & Down, Right & Up, Right, Left & Down, Left & Up, Left, Up, or Down. This is the state of the mirror direction switch. |
Mirror Fold Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the mirror fold switch. |
Mirror Select Switch | -- | Off | The scan tool displays Invalid, Passenger, Driver or Off. This is the state of the mirror select switch. |
Door Lock Control Module Scan Tool Information Passenger Door Module
| Table 1: | Passenger Door Module Scan Tool Data Parameters |
| Table 2: | Passenger Door Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays volts. This is the current battery voltage signal. |
Door Lock Switch | -- | Idle | The scan tool displays Idle, Unlock, Lock or Invalid. This is the state of the door lock switch. |
Door Switch Backlight Command | -- | Varies | This displays %. This is the passenger door switch backlighting percentage. |
Driver Mirror Fold Motor Command | -- | Idle | The scan tool displays Idle, Retract or Extend. This is the state of the driver mirror fold motor. |
Ext. Psgr. Door Handle Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the exterior passenger door handle switch. |
Exterior Courtesy Lamp Status | -- | Off | The scan tool displays On or Off. This is the state of the exterior courtesy lamp. |
Int. Psgr. Door Handle Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the interior passenger door handle switch. |
Front Psgr. Window Position | -- | Varies | This displays Counts. This is the passenger front window position measured in counts. |
Front Psgr. Window Switch | -- | Idle | The scan tool displays Idle, Up, Express Up, Down or Express Down. This is the state of the front passenger window switch. |
Lock Switch Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the lock switch indicator. |
Memory 1 Mirror Horizontal Position | -- | Varies | This displays Counts. This is the driver mirror vertical position stored in memory. |
Memory 1 Mirror Horizontal Position | -- | Varies | This displays Volts. This is the driver mirror vertical position stored in memory. |
Memory 2 Mirror Horizontal Position | -- | Varies | This displays Counts. This is the passenger mirror vertical position stored in memory. |
Memory 2 Mirror Horizontal Position | -- | Varies | This displays Volts. This is the driver mirror passenger position stored in memory. |
Memory 1 Mirror Vertical Position | -- | Varies | This displays Counts. This is the driver mirror vertical position stored in memory. |
Memory 1 Mirror Vertical Position | -- | Varies | This displays Volts. This is the driver mirror vertical position stored in memory. |
Memory 2 Mirror Vertical Position | -- | Varies | This displays Counts. This is the passenger mirror vertical position stored in memory. |
Memory 2 Mirror Vertical Position | -- | Varies | This displays Volts. This is the passenger mirror vertical position stored in memory. |
Passenger Window Motor Command | -- | Idle | The scan tool displays Idle, Invalid, Down, Up, Express Up or Express Down. This is the state of the passenger window motor. |
Psgr. Mirror Fold Motor Command | -- | Idle | The scan tool displays Idle, Retract or Extend. This is the state of the passenger mirror fold motor. |
Psgr. Mirror Heater | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger heated mirror. |
Psgr. Mirror Horizontal Position | -- | Varies | This displays Counts. This is the current passenger mirror horizontal position measured in counts. |
Psgr. Mirror Horizontal Position | -- | Varies | This displays Volts. This is the current passenger mirror horizontal position measured in volts. |
Psgr. Mirror Motors Command | -- | Idle | The scan tool displays Idle, Right, Left, Up, Right & Up, Left & Up, Down, Right & Down or Left & Down. This is the state of the passenger mirror motors. |
Psgr. Mirror Vertical Position | -- | Varies | This displays Counts. This is the current passenger mirror vertical position measured in counts. |
Psgr. Mirror Vertical Position | -- | Varies | This displays Volts. This is the current passenger mirror vertical position measured in volts. |
Window Motor Sensor 1 | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the window motor sensor 1. |
Window Motor Sensor 2 | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the window motor sensor 2. |
Window Normalization | -- | Varies | The scan tool displays Yes or No. This is the state of the passenger window motor normalization. |
Output Control | Description |
|---|---|
Door Switch Backlight | This output control is used to control the door switch backlighting. |
Exterior Courtesy Lamp | This output control is used to control the exterior courtesy lamps. |
Front Psgr. Window Motor | This output control is used to command the front passenger window motor UP or DOWN. |
Lock Switch Indicator | This output control is used to command the lock switch indicator ON or OFF. |
Mirror Fold | This will command the passenger mirror to fold and unfold. |
Mirror Heater | This will command the passenger mirror heater ON and OFF. |
Psgr. Mirror Horizontal Motor | This will command the passenger mirror left and right. |
Psgr. Mirror Vertical Motor | This will command the passenger mirror up and down. |
Door Lock Control Module Scan Tool Information Driver Door Module
| Table 1: | Driver Door Module Scan Tool Data Parameters |
| Table 2: | Driver Door Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Deadbolt Actuator Command | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the deadbolt actuator. |
Door Ajar Switch | -- | Door Closed | The scan tool displays Door Ajar or Door Closed. This is the state of the door ajar switch. |
Door Open Switch | -- | Closed | The scan tool displays Open or Closed. This is the state of the door open switch. |
Door Cylinder Switch | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door cylinder switch. |
Door Switch Backlight Command | -- | Varies | This displays %. This is the commanded door switch backlighting dimming percentage. |
Driver Mirror Heater | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver mirror heater. |
Driver Mirror Horizontal Position | -- | Varies | This displays Volts. This is the current driver mirror horizontal position measured in volts. |
Driver Mirror Motors Command | -- | Idle | The scan tool displays Idle, Fold Out, Fold In, Left, Right, Down or Up. This is the commanded state of the driver mirror motors. |
Driver Mirror Vertical Position | -- | Varies | This displays Volts. This is the current driver mirror vertical position measured in volts. |
Driver Window Position | -- | Varies | The driver window motor output from the DDM, where the window motor movement is measured in Counts. |
Ext. Driver Door Handle Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the exterior driver door handle. |
Exterior Courtesy Lamp Command | -- | Varies | This displays %. This is the commanded exterior courtesy lamps dimming percentage. |
Exterior Courtesy Lamp Status | -- | Off | The scan tool displays On or Off. This is the state of the exterior courtesy lamps. |
LF Latch Solenoid Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver front latch solenoid. |
Lock Indicator Command | -- | Varies | This displays %. |
Lock Switch Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the lock switch indicator. |
Int. Driver Door Handle Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the interior driver door handle. |
VIN Learned | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) is learned. |
VIN Message Received | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) message is received. |
Window Motor Command | -- | Idle | The scan tool displays Idle, Up, Down or Active. This is the commanded state of the window motor. |
Window Normalization | -- | Varies | The scan tool displays Yes or No. |
Output Control | Description |
|---|---|
Disable DTC(s) | This output control is used to disable DTCs in the module. |
Door Deadbolt Lock/Unlock | This output control is used to command the door deadbolt. |
Door Switch Backlight | This output control is used to command the door switch backlighting. |
Driver Mirror Horizontal Motor | This output control is used to command the driver mirror horizontal motor. |
Driver Mirror Vertical Motor | This output control is used to command the driver mirror vertical motor. |
Driver Window Motor | This output control is used to command the driver window motor. |
Exterior Courtesy Lamp | This output control is used to command the exterior courtesy lamps. |
LF Latch Solenoid | This output control is used to command the driver front latch solenoid. |
Lock Switch Indicator | This output control is used to command the lock switch indicator ON or OFF. |
Mirror Fold | This output control is used to command the mirror fold. |
Mirror Heater | This output control is used to command the mirror heater ON or OFF. |
