Remote Control Door Lock Receiver Replacement for Chevrolet Corvette 2009

1

Instrument Panel (I/P) Plate Assembly

Tip
Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.

2

Remote Control Door Lock Receiver Bracket Screws (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

3

Remote Control Door Lock Receiver Bracket

4

Remote Control Door Lock Receiver

Tip

1. Release the retaining clips to remove the receiver from the bracket.
2. Reprogram the receiver. Refer to Control Module References for programming and setup information.