GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Safety and Security 🢒 Theft Deterrent 🢒 Theft Deterrent Alarm Replacement

Removal Procedure

    Object Number: 1269240 Size: SH
  1. Open the rear compartment.
  2. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.
  3. Loosen the screw from the theft deterrent alarm.
  4. Lift the alarm from the bracket.
  5. Disconnect the electrical connector and remove the alarm.

Installation Procedure

    Object Number: 1269240 Size: SH
  1. Connect the electric connector to the theft deterrent alarm.
  2. Install the alarm to the bracket.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the screw on the alarm.

    4. Tighten
    Tighten the screw to 5 N·m (44 lb in).

  4. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.
  5. Close the rear compartment.