GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2010 🢒 Cruze (GME) 🢒 Brakes 🢒 Antilock Brake System 🢒 Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement Disc Brake

Removal Procedure
  1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement.

    2. Object Number: 2028189 Size: SH
  2. Remove the wheel speed sensor screw (2) from the steering knuckle.
  3. Remove wheel speed sensor (1).
  4. Remove wiring harness (3) from bracket (4).

    5. Object Number: 2028202 Size: SH
  5. Disconnect the electrical connector (1).
  6. Remove wheel speed sensor from vehicle.

Installation Procedure

    Object Number: 2028202 Size: SH
  1. Install the wheel speed sensor to the vehicle
  2. Connect the electical connector (1).

    3. Object Number: 2028189 Size: SH
  3. Install the wheel speed sensor (1) to steering knuckle.
  4. Install wiring harness (3) at the bracket (4).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the wheel speed sensor screw (2) and tighten to  9 N·m (80 lb in).
  6. Install rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement.

Rear Wheel Speed Sensor Replacement Drum Brake

Removal Procedure
  1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement.

    2. Object Number: 2028211 Size: SH
  2. Remove the wheel speed sensor screw (2) from the steering knuckle.
  3. Remove wheel speed sensor (1).
  4. Remove wiring harness (3) from bracket (4).

    5. Object Number: 2028212 Size: SH
  5. Disconnect the electrical connector (1).
  6. Remove wheel speed sensor from vehicle.

Installation Procedure

    Object Number: 2028212 Size: SH
  1. Install the wheel speed sensor to the vehicle.
  2. Connect the electical connector (1).

    3. Object Number: 2028211 Size: SH
  3. Install the wheel speed sensor (1) to steering knuckle.
  4. Install wiring harness (3) at the bracket (4).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the wheel speed sensor screw (2) and tighten to  9 N·m (80 lb in).
  6. Install rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement.